HP Cartridge #92 & #93
1. Peal off the top label.
2. Fill the syringe with 5-10 ml. of black ink.
3. SLOWLY inject ink into the hole nearest to the copper strip. (the other four holes are just an empty chamber).
4. When finished, replace the top label or leave it off (it will make no difference in the printing).
5. Replace the
cartridge and run 1 - 3 cleaning cycles as per printer instructions.
If necessary leave cartridge in printer for up to 8 hours.
1. Peal off the top label.
2. Fill the syringe with 5 ml. of color ink.
3. SLOWLY inject ink into each chamber until the sponge is full.
4 . Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.