Canon 7000/8000 series printers.
1. Seal the outlet hole(s) in the base of the cartridge with the aluminum tape provided.
2. Peel back label on top of cartridge enough to expose the filling holes, as shown. It will be the same on the black cartridge.
3. Enlarge the filling hole(s) in the top of the cartridge(s) using the eyelet screw provided.
4. Push needle all the way into the cartridge of the appropriate colour filling hole. Note: The cartridge contains sponge and a slight resistance will be felt. Very slowly inject up to 10ml of black ink or 5 ml of color ink into the sponge until the cartridge is full. The black cartridge also has a clear liquid (this is an optimizer) that is filled on the opposite side from the black. When full ink may seep from the filling and outlet holes.
5. Seal the filling holes(s) in the top of the cartridge by reapplying the label.
6. Unused ink may be returned to the bottle. Clean the syringe
with water and dry for future use, or use with a different color ink.
7. Remove the adhesive tape on the outlet hole(s) and run
1 - 3 cleaning cycles as per printer instructions.
BC-62 Photo Cartridge
The BC-62 photo cartridge has 6 ink wells. The inks wells at the front of the cartridge are the normal inks. The 3 ink wells on the back of the cartridge are the photo inks. Each ink well will hold up to 5cc of color ink. Fill according to the instructions above.