EPSON STYLUS PHOTO/PHOTO EX/700/780/785 /810/820/870/875/1270/1275 STYLUS COLOR 1200 PHOTO PRINTER
1. Seal the outlet holes on the bottom of the cartridge with the aluminum tape provided. A separate piece over each hole is preferred.
2. Fill the syringe with 5 ml. of the correct color ink. From left to right the holes are numbered 1 to 5. 1, 3 and 5 are the regular inks. 2 is photo cyan and 4 is photo magenta. Push the needle through the label into the sponge of the correct filling hole. Very slowly inject ink into the sponge until the cartridge is full.
From left to right the inks wells are 1 to 5:
1. Regular cyan (blue).
2 Photo Cyan (blue).
3. Regular Magenta (red).
4. Photo Magenta (red).
5. Yellow
3. Seal the holes made in the top label with the aluminum tape provided. If the holes are not sealed properly the cartridge will leak.
4. Unused ink can be returned to the bottle. Clean the syringe with warm water and dry for future use, or use with a different color ink.
5. Replace the cartridge leaving the aluminum tape on the outlet holes and run up to 3 cleaning cycles as directed by your printer instructions.